TOOL & ACCESSORIES
Tool and Accessories include not only tube cutter, deburring tool, bending tool but also tube fitting, tube support, penetration gland, heat shrink boots, heat gun and sheath remover and etc.
DETAIL
● Tool & Accessories
| Tube Cutter | cuts stainless steel & copper tubing from 3 to 32mm and 5 to 45mm outside meter. |  |
|---|---|---|
| Deburring Tool | deburr stainless steel, copper and hard alloy tubing end after use of the tube cutter. |  |
| Bending Tool | is available in 6,8,10 and 12mm tubing size and provide consistent, high quality bends in tubing made from materials that can be used with tube fitting. |  |
| Tube Fitting | include a ferrule, in tubing size from 6 to 50mm, to help installers make more consistent, tight tube connections. |  |
| Tube Support | include a ferrule, in tubing size from 6 to 50mm, to help installers make more consistent, tight tube connections. |  |
| Penetration Gland | is widely used for the panel or wall to be penetrate the product wholly. And body length can be made according to the requirements. |
 |
| Heat Shrinkable Boots | is made of themally stabilized, modified polyolefin, these provide a weatherproof end seal and protect against moisture ingress. |  |
● BU / Straight Union
| Designations | Tube O.D | E | width across flat | i | ℓ | Approx | |
|---|---|---|---|---|---|---|---|
| D | H1 | H | L | ||||
| BU-06 | 6 | 4 | 14 | 14 | 7 | 30 | 51 |
| BU-08 | 8 | 6 | 17 | 17 | 7 | 31 | 52 |
| BU-10 | 10 | 8 | 17 | 19 | 7 | 31 | 54 |
| BU-12 | 12 | 10 | 19 | 22 | 7 | 31 | 54 |
● BBUM / Welding bulkhead Union
| Designations | Tube O.D | A | E | width across flat | i | ℓ | Approx |
|---|---|---|---|---|---|---|---|
| D | H | L | |||||
| BBUW-06 | 6 | 16 | 4 | 14 | 7 | 74 | 95 |
| BBUW-08 | 8 | 16 | 6 | 17 | 7 | 74 | 95 |
| BBUW-10 | 10 | 19 | 8 | 19 | 7 | 74 | 97 |
| BBUW-12 | 12 | 20 | 10 | 22 | 7 | 74 | 97 |
● BMC-G / Male Connector
| Designations | Tube O.D | (PF) T |
E | width across flat | i | ℓ | A | H | Approx | |
|---|---|---|---|---|---|---|---|---|---|---|
| D | H1 | H | L | |||||||
| BMC06-01G | 6 | 1/8 | 4 | 14 | 14 | 7 | 28 | 14 | 8 | 30.5 |
| BMC06-02G | 6 | 1/4 | 4 | 19 | 14 | 7 | 33 | 18 | 12 | 31.5 |
| BMC08-01G | 8 | 1/8 | 4 | 17 | 17 | 7 | 28 | 14 | 8 | 30.5 |
| BMC08-02G | 8 | 1/4 | 6 | 19 | 17 | 7 | 33 | 18 | 12 | 31.5 |
| BMC10-02G | 10 | 1/4 | 6 | 19 | 19 | 7 | 33 | 18 | 12 | 32.5 |
| BMC10-03G | 10 | 3/8 | 8 | 22 | 19 | 7 | 34 | 21.5 | 12 | 33.5 |
| BMC12-02G | 12 | 1/4 | 6 | 19 | 22 | 7 | 33 | 18 | 12 | 32.5 |
| BMC12-03G | 12 | 3/8 | 8 | 22 | 22 | 7 | 34 | 21.5 | 12 | 33.5 |
| BMC12-04G | 12 | 1/2 | 10 | 27 | 22 | 7 | 39 | 25.5 | 14 | 36.5 |